Plumber Melton Prices: What Common Jobs Cost

The hourly estimate for Melbourne and surrounding metro areas is $88 to $149, including GST (November 2026). Melton sits within that spread, so use it as a guide for a blocked drain, a leaking tap or a small repair.

Where a job lands in the range depends on a few things. One is how long the fault takes to find and fix. Another is whether parts are needed and what they cost. Access matters too, since a pipe behind a wall or under a slab takes longer to reach. After hours work can also lift the price.

A quick tap washer is a short visit. A leak that has soaked into a wall takes longer, since the plumber has to find where the water is coming from before fixing it.

These are typical ranges as at November 2026, and your quote sets the figure for your job.

Replacing a toilet or cistern in Victoria runs $260 to $620, including GST. Installing new bathroom tapware in Victoria runs $155 to $410, including GST.

A roof leak or gutter outlet repair in an Australian metro area runs $350 to $900, excluding GST. Replacing a gas hot water unit like for like runs $1,800 to $3,500, excluding GST. A heat-pump hot water unit, installed, runs $3,800 to $6,500, excluding GST.

A bathroom rough-in for a renovation runs $2,800 to $6,500, excluding GST. A rough-in is the pipework set into the walls and floor before the tiles and fittings go on.

Some figures include GST and some leave it out, so the same job can look cheaper or dearer on paper. Replacing a toilet or cistern runs $260 to $620 including GST, while a toilet supplied and installed across Australian metro areas runs $650 to $1,400 excluding GST (November 2026), so check whether the toilet itself is in the price.

Quotes also differ on what they cover. One may replace a worn part and another may fix the reason it wore out. A price that includes finding the cause often costs more on the day and less over the next year.

A cheap plumber in Melton is best judged by the total job, not the hourly rate. A low rate with a long visit, or a patch that fails in a month, costs more than a fair rate with the fault fixed properly.

You should hear the price before work starts and decide whether it goes ahead. A good plumber also explains in plain words what went wrong and what the fix involves.

Plumbing services in Australia also come with automatic consumer guarantees, including due care and skill. That protection applies whatever the price.

In Victoria, the $750 threshold for a compliance certificate counts everything on the job. That means materials, appliances, labour and GST, even if you bought the tap, toilet or appliance yourself.

So a job that looks small on labour alone can still reach the line once a new fixture is added. When a job needs a certificate, the licensed plumber must get it to you within five days of finishing.

If you smell gas and it is strong or anyone feels unwell, get everyone outside without touching any switches and call 000 from a safe distance. If it is faint, close the appliance gas tap, open the windows, keep flames away and turn the gas off at the meter if it is safe to reach. If the smell stays, call the emergency number on your gas bill, then use the enquiry form. If anyone is in danger, call 000 first.

Tell the plumber what has gone wrong in your own words. Say what is leaking, running, blocked or cold, and name your suburb, whether that is Kurunjang, Melton South, Melton West or nearby. The more you can type about the problem, the closer the first price will be.

When you are ready, use the enquiry form.